You are not logged in.

Announcement

[2017.09.08] DeployStudio build v1.7.8 (checksum, release note).
[2016.08.26] DeployStudio build v1.6.19 (release note).
[2013.02.23] DeployStudio last universal build v1.5.17 (release note).

#1 2017-08-01 19:02:12

running81620
Member
Registered: 2017-08-01

Can't netboot new iMac (MMQA2LL/A) or create netboot set DS1.7.6

As others have also stated, I can't netboot a new iMac or create a new netboot set with a new iMac. Netboot gets the circle with a line. The netboot set creation fails immediately and states to check the log. The sys log states:

Jul 31 20:18:48 Informations-iMac DeployStudio Assistant[575]: /Volumes/MacUSB/Applications/Utilities/DeployStudio Admin.app/Contents/Applications/DeployStudio Assistant.app/Contents/Resources/sysBuilder/netboot_helpers/ds_best_recovery_device_info.sh
Jul 31 20:18:49 Informations-iMac com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): Unknown key for integer: _DirtyJetsamMemoryLimit
Jul 31 20:18:49 --- last message repeated 1 time ---
Jul 31 20:18:49 Informations-iMac DeployStudio Assistant[575]: Running sys_builder_rp.sh v2.1 (Mon Jul 31 20:18:49 MDT 2017)
Jul 31 20:18:49 Informations-iMac DeployStudio Assistant[575]: Unsupported system version (10.12)!
Jul 31 20:18:49 Informations-iMac DeployStudio Assistant[575]: Aborting sys_builder_rp.sh v2.1 (Mon Jul 31 20:18:49 MDT 2017)
Jul 31 20:18:49 Informations-iMac DeployStudio Assistant[575]: RuntimeAbortScript

This behavior was exhibited right out-of-the-box with iMac (10.12.4). I went ahead and used recovery mode to re-install the OS (10.12.6). The same behavior occurred.

Any ideas outside of 'wait for DS to get a new update'?

Offline

#2 2017-08-07 20:35:38

Peteo
Member
Registered: 2012-03-22

Re: Can't netboot new iMac (MMQA2LL/A) or create netboot set DS1.7.6

did you create a new netboot set based on 10.12.5/6?

Offline

Board footer

Powered by FluxBB