You are not logged in.

Announcement

[2017.01.08] DeployStudio build v1.7.6 (checksum, release note).
[2016.08.26] DeployStudio build v1.6.19 (release note).
[2013.02.23] DeployStudio last universal build v1.5.17 (release note).

#1 2017-01-10 10:11:05

lottahn
Member
From: Gothenburg Sweden
Registered: 2016-05-27

Can´t get 10.12 NBI bootable

Have created 10.12 NBI´s on three different hardwares and a VM with no luck.
MBP 15” 2012, MBP 15” 2015, MBP15” 2016 and on a virtual machine on this client. All times on client with built 16C68.
The Server is on 10.11.6 and DS 1.7.5. (newly upgraded to this state)

I can in console see the clients (MBP 15” 2012, MBP 15” 2015) trying to access. The one from 2015 are showing a stopsign and in the log I can see this;
2017-01-09 20:30:52,688 DeployStudio Admin[5462]:  SecOSStatusWith error:[-34018] Error Domain=NSOSStatusErrorDomain Code=-34018 "client has neither application-identifier nor keychain-access-groups entitlements" UserInfo={NSDescription=client has neither application-identifier nor keychain-access-groups entitlements}
2017-01-09 20:31:26,701 launchservicesd[101]: SecTaskLoadEntitlements failed error=22

2017-01-10 09:53:58,826 bootpd[37433]: BSDP INFORM [en0] 1,40:6c:8f:4e:66:5f NetBoot132 arch=i386 sysid=MacBookPro9,1
2017-01-10 09:53:58,827 bootpd[37433]: NetBoot: [1,40:6c:8f:4e:66:5f] BSDP ACK[SELECT] sent 10.194.5.177 pktsize 355
2017-01-10 09:54:01,971 httpd[45136]: nw_nat64_get_if_state notify_register_check(com.apple.networkd.nat64.ifstate) failed: 1000000
2017-01-10 09:54:13,000 kernel[0]: Limiting open port RST response from 252 to 250 packets per second
2017-01-10 09:54:21,004 httpd[45138]: nw_nat64_get_if_state notify_register_check(com.apple.networkd.nat64.ifstate) failed: 1000000
2017-01-10 09:54:22,012 httpd[50234]: nw_nat64_get_if_state notify_check for com.apple.networkd.nat64.ifstate failed: 2
2017-01-10 09:54:36,989 com.apple.xpc.launchd[1]: (com.apple.auditd[50240]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd

No problem to create and boot on a 10.7.5 NBI (do not ask me why :/ )
This client "sysid=MacBookPro9,1", mentioned above, are able to netboot on a 10.7.5 NBI.

Any suggestions, I have run out of idéas

Offline

#2 2017-01-10 22:27:43

Meat
Member
From: SF CA US
Registered: 2009-02-04

Re: Can´t get 10.12 NBI bootable

In case you haven't tried any of these...

Check your netboot set access privileges: ls -al /Library/NetBoot/NetBootSP0
Privileges should be: drwxrwxr-x
Owner: root
Group: admin

Turn off all other netboot sets in Server.app (what version of Server.app are you running?)

What is the network like for your environment? All target machines on the same subnet as the server.
How are you netbooting? Holding option key down at boot time?

Is your netboot set pointing to the right server? Remove any secondary server entry at creation time.
Is your 10.12 netboot set just 10.12?
Why not 10.12.2?

Zap the PRAM?

Offline

#3 2017-01-11 10:52:09

lottahn
Member
From: Gothenburg Sweden
Registered: 2016-05-27

Re: Can´t get 10.12 NBI bootable

Checked priviliges that they are correct.
After upgrade to DS 1.7.6 I only have one set of NBI
10.12.2
Only have one Netinstall server.
All target machines are on different subnets. The server are situated 500 km away from me and have been working since 2012, latest working DS version was 1.7.3 since July 2016 until now.
But, I was able to Netboot a MBP 2012 with a 10.7.5 NBI created with DS 1.7.5. But this very client were not able to boot on a 10.12.2. NBI created with DS 1.7.5.

Offline

#4 2017-01-11 18:07:29

Meat
Member
From: SF CA US
Registered: 2009-02-04

Re: Can´t get 10.12 NBI bootable

After installing DeployStudio 1.7.6 (I'm still on 1.7.5), did you walk through the DeployStudio Assistant server setup and confirm settings?

Is it possible that when creating the 10.12.2 nbi with 1.7.5 you may have introduced a typo or misconfig?

Otherwise, I got nothin. :P

Offline

#5 2017-01-12 19:35:46

lottahn
Member
From: Gothenburg Sweden
Registered: 2016-05-27

Re: Can´t get 10.12 NBI bootable

Yes, gone through Assistant setup once again.
After that all kinds of first aid on Mac mini.
Have created at least 10 pcs NBI on different HW and on different way of installed OS, (reinstalled from recovery, installed from AutoDMG image) different OS versions in the NBI and so on.

Offline

Board footer

Powered by FluxBB