You are not logged in.

Announcement

[2017.09.08] DeployStudio build v1.7.8 (checksum, release note).
[2016.08.26] DeployStudio build v1.6.19 (release note).
[2013.02.23] DeployStudio last universal build v1.5.17 (release note).

#1 2017-10-31 06:19:39

Vij Na
Member
Registered: 2014-11-25

Imaging USB-C MacBook, DS 1.7.8 with Belkin USB-C Ethernet adapter

I had a working netboot with the new USB-C  MacBook 13" and Touch iD Macbook Pro 15"  using the Belkin USB-C to Ethernet adapter with the following config.
Mac OS 10.12.5 with server 5.3.1 with DS 1.7.6
NBI set made with an AutoDMG Mac OS 10.12.6
Subsequently I upgraded to Mac OS 10.12.6 and DS 1.7.8 created a new NBI (both with the AutoDMG Mac OS 10.12.6 and the DS Mac OS which is now 10.12.6)
Result the new USB-C Macbooks with Belkin adapter could not netboot.
Workaround:  with Apple USB to Ethernet connected to the Apple Multiport USB-C adaptor which has an USB port. However the imaging is very slow.
My Question:
What could possibly have changed after the DS/Mac OS upgrade. Why did the older config work with the Belkin adapter and newer not work?

Offline

#2 2017-11-01 09:15:13

Vij Na
Member
Registered: 2014-11-25

Re: Imaging USB-C MacBook, DS 1.7.8 with Belkin USB-C Ethernet adapter

Tried a few options and it is now clear that the DS upgrade from 1.7.6  to 1,7.8 has caused the problem.
Need to revert to 1.7.6 - please advise how to do this without affecting the DS settings and workflows.

Offline

#3 2017-11-01 16:41:10

Meat
Member
From: SF CA US
Registered: 2009-02-04

Re: Imaging USB-C MacBook, DS 1.7.8 with Belkin USB-C Ethernet adapter

Uninstall the current version (your repository and workflows should be uneffected) using the uninstaller, then install the 1.7.6 version.
After installing the 1.7.6 version, walk through the server config in DeployStudio Assistant and verify/reenter passwords and settings there.

If you still have your netboot image/s from the same 1.7.6 version, disable any newer netboot image/s and reenable your 1.7.6 netboot image/s.
If there are issues, then might have to recreate the 1.7.6 netboot image

Offline

#4 2017-11-02 09:33:53

Vij Na
Member
Registered: 2014-11-25

Re: Imaging USB-C MacBook, DS 1.7.8 with Belkin USB-C Ethernet adapter

Thanks Meat.

Offline

Board footer

Powered by FluxBB