You are not logged in.

Announcement

[2017.09.08] DeployStudio build v1.7.8 (checksum, release note).
[2016.08.26] DeployStudio build v1.6.19 (release note).
[2013.02.23] DeployStudio last universal build v1.5.17 (release note).

#1 2017-08-30 17:30:02

y2j420
Member
Registered: 2015-03-19

NetBoot booting excessively slow...

I recently received a new 13" MacBook Pro w/ Touchbar (min-2017) running 10.12.6.  I went to my Apple imaging server and created a new NBI from this device.  I'm using DeployStudio 1.7.7.  The NBI creation process finishes in about 5 - 10 min.  I then boot this Mac up and try to boot from it.  The progress bar begins and then slowly loads.  After about 25 min. it finally hits the end of the loading bar, but goes no further.  After about 40 min. I shut it down.  I tried the same NBI with an old Mac and it does the same thing.  Unfortunately (but expectedly), this new MacBook Pro won't boot off my old NBI (though my older Macs still do).

Any suggestions?

Offline

#2 2017-09-04 11:56:19

hook
Member
From: Jönköping, Sweden
Registered: 2012-05-14

Re: NetBoot booting excessively slow...

I've seen the same problem with 1.7.7 on the iMac I usually create the NBI from. Creating the NBI with 1.7.6 on the same OS/hardware works fine so that's my workaround for now.

Last edited by hook (2017-09-04 11:58:00)

Offline

#3 2017-09-08 23:16:57

admin
Administrator
Registered: 2007-03-29
Website

Re: NetBoot booting excessively slow...

It’s fixed in v1.7.8.

Offline

#4 2017-09-12 09:44:40

hook
Member
From: Jönköping, Sweden
Registered: 2012-05-14

Re: NetBoot booting excessively slow...

Yep, confirmed fixed for me with 1.7.8.

Offline

Board footer

Powered by FluxBB